Manually activate Office 2019 for Free

Here are instructions on how to manually activate Office 2019 via CMD without using additional software.

Step 1: Open command prompt in administrator mode.
First, you need to open command prompt with admin rights, then follow the instruction below step by step. Just copy / paste the commands and do not forget to hit Enter in order to execute them.

Step 2: Open location of the Office installed on your PC.

cd /d %ProgramFiles%\Microsoft Office\Office16
cd /d %ProgramFiles(x86)%\Microsoft Office\Office16

If you install your Office in the ProgramFiles folder, the path will be “%ProgramFiles%\Microsoft Office\Office16” or “%ProgramFiles(x86)%\Microsoft Office\Office16”. It depends on the architecture of the Windows OS you are using. If you are not sure of this issue, don’t worry, just run both of the commands above. One of them will be not executed and an error message will be printed on the screen.

Step 3: Convert your retail license to volume one.

for /f %x in ('dir /b ..\root\Licenses16\ProPlus2019VL*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%x"

If your Office is got from Microsoft, this step is required. On the contrary, if you install Office from a Volume ISO file, this is optional so just skip it if you want.

Step 4: Activate your Office using KMS client key.
Make sure your PC is connected to the internet, then run the following command.

cscript ospp.vbs /setprt:1688
cscript ospp.vbs /unpkey:6MWKP >nul
cscript ospp.vbs /inpkey:NMMKJ-6RK4F-KMJVX-8D9MJ-6MWKP
cscript ospp.vbs /sethst:107.175.77.7
cscript ospp.vbs /act

Note: You need to hit [Enter] key to execute commands.

If you see the error 0xC004F074, it means that your internet connection is unstable or the server is busy. Please make sure your device is online and try the command “act” again until you succeed.

Your Office is activated successfully

 

Manually activate Windows 10 for Free